PeriPage is a pocket thermal printer designed to print anything & anywhere you want! Just connect it with your phone to start printing. It is easy to use, super cute and easy fit your pocket or bag so it's super portable! Print notes, memo, photos, to-do list and more.

No, PeriPage is a thermal printer so it can print only monochromatic, but you can find different type of colored paper to use with here!

Spoiler: Colored Photo printer it's on the way

1. insufficient battery power and print density in the print preview of the app.
2.Clean the print head with alcohol.
3. Please replace a new paper roll printing, moisture in the paper roll can result in blurred prints.

1. Download the peripage app or perimonkey HERE
2. Turn on the printer and activate Bluetooth on your phone within 3 meters of the printer.
3. Open the peripage app or perimonkey  and connect to the printer via Bluetooth.
4. Alternatively, turn on the printer and print a OR code by double-clicking the power button. Then, in the app, click "scan OR code" to
connect via Bluetooth.

A: Blank pages usually result from incorrect paper orientation or unsupported paper types1. Confirm the thermal side of the paper is facing the print head.
2. Ensure the paper roll is loaded tightly and aligned properly.
3.Only use peripage-branded thermal paper.

A: lf your printer says "Paper not detected," try the following.
1. Reinsert the paper roll and ensure it's tightly installed.
2. Clean the paper detection sensor near the roler.
3. Use official paper with the correct dimensions.

A: Missing lines or broken text can indicate a dirty print head or a damaged roller.
1. Clean the print head carefully using alcohol wipes.
2. Make sure the paper is not wrinkled or jammed.
3. Update the Print Master App and firmware if available.

1. Make sure the paper roll is installed correctly and pull it out of the paper outlet.
2. Clean the print head with alcohol.
3. f the indicator ight is stil red, try the following steps: When the printer is on and the Remove Label Paper Rollindicator light is red, makesure the printer is in standby with no labels,Press and hold the Power button for 10-20 seconds and release it when the indicator lightturns orange.Reinstall the paper roll, turn on the printer and start printing.

1. Make sure the paper rollis installed correctly by checking that it is installed on the right side of the printer (required for Mi0, Ml20 only)and pulling the paper roll to the paper outlet.
2. Try cleaning the printer sensor with an alcohol-based cotton pad.3. f it stil doesn't work, follow the steps below: first,remove the paper roll inside the printer then turn the printer on.second, close theprinter cover, press the power buton to select the firmware version, and then press the paper feed button to confirm.Third, reinstall the
paper roll for printing.
4. Please connect the printer to the printer Master,when the App prompts the label paper abnormalities, please cick not yet resolvedand then according to the prompts to remove the label and close the printer cover, click the bottom of the App under the boot statereset , wait for 5 seconds, restart the printer, and then reinstallthe label to see if the printer is normal recognition of labels.

1. Please check whether the paper roll holder is installed too tightly or the paper roll core does not match the holder, note that the papelroll cannot be loaded into the holder when the paper roll core does not match the holder.2. pul the paper roll to the paper outlet, at least i cm beyond the outlet, and try to press the paper feed button to see if the printerdispenses paper normally.
3. Try printing on another roll of paper and check that the printer is printing properly.4.Press the reset button next to the charging port with a safety pin. lf the reset is successful, the printer will power of. Please turn it onagain and try printing.

Download and install the computer driver on the official website. After that, use it just like the normal printer. (The downloaded driver package contains instructions and print templates)

https://www.ileadtek.com/en/download.html

1. Please restore the factory settings:
A. lnsert labels and ensure they are straight and smooth. Hold the Feed Button for about 10 seconds while the printer is on standbyB. After the blue light flashes 4 times, release the Feed Button.
2. Run automatic label recognition (Labels separated by gaps):A. insert labels and ensure they are straight and smooth. Hold the feed Button for about 6 seconds while the printer is on standbyB. After the blue liaht flashes 2 times, release the Feed Button.
3. Please make sure you are using the original 24V-2.5A power adapter.4. Reduce the print darkness to 2-6 and speed to 3-5 before printing again.
5. Print the test page manually.
Hold the Feed Button until the blue light flashes once, then release.A test page wil print. if it looks good, print the label

Any Micro-USB adapter is capable of charging PeriPage. It can also be charged by PC.

PeriPage A6 can print 8-10 rolls paper after a full charge. PeriPage A9/A9S/A9S Pro can print 8-10 rolls paper after a full charge.

PeriPage A9s Max can print 8-10 rolls paper after a full charge.

Green on-fully charged / normal use state;

Red on-Charging / paper shortage / print head overheating / cover opened;

Red flashing-Low battery. It will cause the print to be light, please charge in time;

Orange on-Printer debugging mode has been entered, long press the power button until shutdown to exit debugging mode.

Red light flashes quickly-Bluetooth failed , restart the printer

PeriPage A9S has 304 dpi, and the resolution of it has been greatly improved, it's appearance has been optimized with graceful lines in design make it more fashionable and the battery last 2x more longer.

A: The red light can indicate overheating, low battery, or paper issues.
1. Allow the printer to cool down if it has been used for extended periods.
2. Check for paper jams or low battery.
3. Refer to the in-app error indicator for more details.

Both have 304dpi and can print HD picture, The main difference between A9 Pro and A9S is that it can print grayscale photos that are closer to the real thing, making the color gradation of the photos more abundant.

PeriPage currently has a variety of products on sale. A6 is a push-type slide to open the cabin, A9 and A9S, A9PRO, and A9MAX are button-style to open the cabin, put paper in the cabin, close the cabin, and wait for the green light to turn on.

Yes, PeriPage is a thermal printer like receipts printer, so the prints will fade over time, but our official paper is appositely improved to be high contrast, fade resistence and water resistence! Some of our paper roll are certified to last up to 10 years or more!

Please don't leave the paper exposed to heat source, hot enviromental condition can make the paper fade more quickly.

We are working to develop new type of paper that never fade!

Our official paper last 5-10 years depending on the type.

1. Please download the  PeriPage APP for your IOS or Android device. 
2. Turn on the bluetooth on your phone and the printer.
3. Open the App and connect the printer from the App.

Note: If your product cannot be connected normally, please confirm whether it is the latest version or it still cannot be connected. You can double-click the power button twice and wait for the QR code to be automatically printed out by the machine, turn on the QR code scanning function of the software, and scan to connect to the machine.

PeriPage is the thermal printer, which requires no ink. Just load the paper in, and you can print.

PeriPage A6 supports 56x30mm basic thermal paper, label thermal paper and sticker thermal paper. 
PeriPage L1 support 13.5x36mm thermal tape.
PeriPage A9/A9S/A9Pro support 56*30mm,77x30mm thermal paper, label thermal paper and sticker thermal paper.

PeriPage A9s Max support 56x30mm,77x30mm,107x30mm thermal paper, label thermal paper and sticker thermal paper.

PeriPage's official paper has passed BPA test, and it is BPA free.